Home / Micromachining / Precision Components for Instrument Makers

Precision Components for Instrument Makers

Clark-MXR makes the small, critical parts inside analytical and diagnostic instruments: apertures, slits and other micromachined components for spectrometers, electron microscopes, X-ray tools and ion-beam systems. We machine them with femtosecond lasers, inspect them, and clean and pack them in our ISO 5 cleanroom, so they arrive ready to go straight onto your production line.

We have delivered parts to instrument makers for over 20 years, and our customers include Fortune 100 and Fortune 500 companies in semiconductors and semiconductor equipment, and in health care equipment and supplies.

Request a quote   Send us a drawing

NDAs are available on request.

40 µm aperture in black-oxidized stainless steel, machined with a femtosecond laser
A 40 µm aperture in black-oxidized stainless steel.

Parts we make for instruments

  • Beam-defining apertures and pinholes, from 1 µm to 1 mm, including 2–5 µm features in 25–50 µm thick tantalum and molybdenum.
  • Entrance and exit slits for spectrometers, such as a 50 µm wide entrance slit in molybdenum, machined with no post-processing.
  • Apertures in coated foils, such as a 40 µm aperture in black-oxidized 300-series stainless steel.
  • Custom micromachined parts that combine holes, slits, cut profiles and milled features in one component.

Standard sizes and tolerances are listed on our Precision Apertures, Pinholes and Slits page.

Edges that perform and last

These parts shape and route a beam of light, electrons, ions or X-rays, so the edge matters. A burr or void scatters energy, causing diffraction and interference that degrade the instrument’s signal. Rough edges also wear over time, as the energy that collects on them causes thermal fatigue. Femtosecond pulses remove material before heat can spread, so edges are clean and burr- and void-free. That gives you more consistent parts to design around and longer-lasting components in the field.

Delivered ready for your production floor

Most laser shops inspect parts, put them in a bulk bag and ship them. Your team then has to unpack, clean and re-inspect each part and carry it into your cleanroom, and some delicate parts are damaged along the way.

We do that work for you:

  • Inspected: parts are measured on calibrated scanning electron microscopes and optical systems, with inspection data supplied on request.
  • Cleaned: with ultrasonic and plasma cleaning, including an ultrasonic cleaner inside our ISO 5 cleanroom.
  • Packed to your specification: in cleanroom packaging, or custom packaging designed around how your line handles the parts, with OEM labeling if you need it.

Parts go from the box to your assembly, with no incoming cleaning or re-inspection, fewer handling steps and less yield loss. Learn more about our inspection services.

Clark-MXR ISO 5 cleanroom for inspection, cleaning and packaging
Our ISO 5 cleanroom for inspection, cleaning and packaging.

Components and sub-assemblies

Beyond single parts, we offer contract production of components and sub-assemblies, with in-house assembly, inspection and packaging. Clark-MXR can take your part from process development through production, so you work with one supplier from start to finish.

How we work with instrument makers

  1. Send us your drawing. The material, critical dimensions, quantities and how you need parts packed. We sign NDAs on request.
  2. Feasibility and samples. We confirm what we can make and machine first parts, with inspection data.
  3. Production. We run your parts with the same documented process, inspection and packaging, from small lots to production runs in the thousands.
  4. Repeat supply. Reorders are made the same way, so parts stay consistent from lot to lot.

Request a quote

For the full range of drilling, cutting and milling, see Femtosecond Laser Micromachining Services. For background on the process, see our Ultrafast Laser Micromachining Handbook.

Frequently asked questions

What kinds of instruments do you make parts for?

Spectrometers, electron microscopes, X-ray tools, ion-beam systems and other optical and particle-beam instruments.

What materials do you work in?

For apertures and slits, we stock 50 µm black-oxide coated stainless steel and 50 µm molybdenum, and also machine various refractory metals, such as tantalum, and almost any other metal foil to order. For other parts, see the materials on our micromachining services page.

Can parts be delivered ready for our cleanroom?

Yes. We clean and pack parts in our ISO 5 cleanroom, in standard or custom packaging with OEM labeling if needed, so they can go straight to your assembly.

Do parts come with inspection data?

On request. Parts are measured on calibrated SEM and optical systems, and we can send the data with them.

Can you supply sub-assemblies?

Yes. We offer contract production of components and sub-assemblies, with assembly, inspection and packaging in-house.

Will you sign an NDA?

Yes, on request, before you send drawings.

What quantities do you handle?

From prototypes to production runs in the thousands, with the same process from lot to lot.

Request a quote for instrument components

Tell us about your part and we’ll get back to you. Drawings help us respond faster, and we’re happy to sign an NDA before you share details — just check the box below.