Home / Micromachining / Precision Apertures, Pinholes and Slits

Precision Apertures, Pinholes and Slits

Clark-MXR machines apertures, pinholes and slits from 1 µm to 1 mm with femtosecond lasers, so edges come out clean, round and free of burrs. Every part ships with an inspection certificate, and parts can be cleaned and packed in our cleanroom so they go straight into your instrument.

Request a quote   Send us a drawing

Prices depend on size, material and quantity, so every order is quoted. Tell us what you need and we’ll reply with a quote.

SEM image of a femtosecond laser-machined round aperture, 10 µm scale bar

Standard apertures and pinholes

Standard apertures are machined from our stocked foils: 50 µm thick black-oxide coated stainless steel or 50 µm thick molybdenum.

DiameterToleranceCircularity
1 µm±0.25 µm>85%
2 µm±0.25 µm>85%
5 µm±1 µm>90%
10 µm±1 µm>90%
25 µm±2 µm>90%
50 µm±2.5 µm>95%
100 µm±5 µm>95%
250 µm±6 µm>95%
500 µm±10 µm>95%
1000 µm±10 µm>95%

Diameters between these sizes are made to order. Below 50 µm the foil may be counterbored around the hole.

5 µm pinhole measured at 4.89 µm and 5.12 µm across two axes
A 5 µm pinhole, measured at 4.89 and 5.12 µm across two axes.
40 µm aperture in black-oxidized stainless steel, machined with a femtosecond laser
A 40 µm aperture in black-oxidized stainless steel.

Standard slits

Standard slits are 5 mm long, in the same stocked foils: black-oxide coated stainless steel or molybdenum.

Slit widthTolerance
5 µm±1 µm
10 µm±1 µm
25 µm±2 µm
50 µm±2.5 µm
100 µm±4 µm
250 µm±6 µm
500 µm±10 µm
1000 µm±10 µm

Below 50 µm wide the foil may be counterbored along the slit.

5 µm wide precision slit machined with a femtosecond laser
A 5 µm wide slit.
150 µm wide precision slit machined with a femtosecond laser
A 150 µm wide slit.

Custom apertures and slits

We also make apertures and slits to your drawing: other foils such as tantalum, other thicknesses, longer slits, and features from 1 µm. Examples include 2–5 µm holes and slits in 25–50 µm thick tantalum and molybdenum, a 50 µm wide spectrometer entrance slit in molybdenum, and a 40 µm aperture in black-oxidized stainless steel. Custom parts can also combine apertures with other machined features, or be supplied as sub-assemblies.

Why edge quality matters

Apertures and slits shape and steer the beam in spectrometers, electron microscopes, X-ray tools and ion-beam systems. A burr or void on the edge scatters energy, which causes unwanted diffraction and interference. Over time, energy concentrated on a rough edge also wears it through thermal fatigue. Femtosecond pulses remove material before heat can spread, so edges are burr- and void-free without polishing or other post-processing.

Close-up of a femtosecond laser-cut slit edge, 10 µm scale bar
A laser-cut slit edge, with no burrs or melt along the cut.

Inspected, cleaned and packed for your cleanroom

Every aperture and slit ships with an inspection certificate. We measure parts on calibrated scanning electron microscopes and optical systems, then clean them and pack them in our ISO 5 cleanroom, in custom packaging if you need it. Parts arrive ready for your production floor, so your team can skip cleaning and re-inspection, and fewer delicate parts are damaged in handling. Learn more about our inspection services.

How to order

  1. Tell us what you need. Diameter or slit width, material, thickness, quantity, and any drawing.
  2. Get a quote. We’ll confirm what we can make and reply with a price.
  3. We machine, inspect and pack your parts, and ship them with inspection certificates.

Request a quote

For other micro-holes, cuts and milled features, see Femtosecond Laser Micromachining Services.

Frequently asked questions

What is the smallest aperture you make?

1 µm. Both 1 µm and 2 µm diameters are standard sizes, held to ±0.25 µm.

What is the difference between an aperture and a pinhole?

None in practice. Small round apertures are often called pinholes, especially for spatial filtering and imaging. We make both to the same tolerances.

What material are standard apertures and slits made from?

We stock 50 µm thick black-oxide coated stainless steel and 50 µm thick molybdenum. We also machine various refractory metals, such as tantalum, and almost any other metal foil to order.

Do you sell apertures and slits from stock?

No. Each order is made and quoted to your size, material and quantity.

Do the parts come with inspection data?

Yes. Every part ships with an inspection certificate.

Can you make a size or shape that isn’t listed?

Yes. Send us a drawing with the size, material and quantity, and we’ll tell you what we can make.

Can parts be delivered cleanroom-ready?

Yes. We clean and pack parts in our ISO 5 cleanroom, in custom packaging if needed.

Request an aperture or slit quote

Tell us about your part and we’ll get back to you. Drawings help us respond faster, and we’re happy to sign an NDA before you share details — just check the box below.