Our CPA-Series ultrafast lasers are the only fully integrated kHz Ti:Sapphire femtosecond and picosecond laser systems on the market today. The turn-key nature of this extremely compact laser accentuates its productivity and utility.
With a truly No Tweak™ design, our lasers will run for days without the need to periodically readjust it to optimize performance.
Don't know where to start when making your laser selection?
Read our handy
LASER BUYER'S GUIDE
CPA model comparison chart. Please see data sheets for complete specifications.
CPA-2101
CPA-2110
CPA-2161
CPA-2210
Femtosceond Version:
Pulse Energy >0.8 mJ @ 1 kHz
>1mJ @ 1kHz, > 0.6 mJ @ 1-2 kHz
Constant average power of 2.5W from 3 kHz to 6 kHz (Customer chosen factory setting).
>2 mJ @ 1kHz, >1.5 mJ@1-2 kHz
Pulse Width
<150 fs
<150 fs <150 fs <150 fs TBWP
<1.4 x transform limit (sech2) <1.4 x transform limit (sech2) <1.4 x transform limit (sech2) <1.4 x transform limit (sech2)
Picosecond Option:
Pulse Energy
>0.6 mJ @ 1kHz
Bandwidth
<8 cm-1
TBWP
<1.2 x transform limit (gaussian)
Oscillator Output Option 1:
Wavelength
1550 nm
1550 nm 1550 nm 1550 nm Power
10 mW
10 mW 10 mW 10 mW Repetition Rate
30 MHz, nominal
30 MHz, nominal 30 MHz, nominal 30 MHz, nominal Oscillator Output Option 2:
Wavelength
775 nm
775 nm 775 nm 775 nm Power
3 mW
3 mW 3 mW 3 mW Repetition Rate
30 MHz, nominal 30 MHz, nominal 30 MHz, nominal 30 MHz, nominal Oscillator Output Option 3:
Wavelength
1550nm & 775 nm
1550nm & 775 nm 1550nm & 775 nm 1550nm & 775 nm Power
7 mW @ 1550nm, 3 mw @775 nm
7 mW @ 1550nm, 3 mw @775 nm 7 mW @ 1550nm, 3 mw @775 nm 7 mW @ 1550nm, 3 mw @775 nm Repetition Rate
30 MHz, nominal
30 MHz, nominal 30 MHz, nominal 30 MHz, nominal General:
Wavelength 775 nm 775 nm 775 nm 775 nm M2 <1.5
1.2 +/- 0.1
1.2 +/- 0.1 1.2 +/- 0.1 Repetition Rate User adjustable up to 1 kHz User adjustable up to 2 kHz User adjustable up to 6 kHz User adjustable up to 2 kHz Polarization
linear, horizontal
linear, horizontal linear, horizontal linear, horizontal Energy Stability
<1 % RMS
<1 % RMS <1 % RMS <1 % RMS Beam Diameter (FWHM)
4-6 mm
4-6 mm 4-6 mm 4-6 mm Physical Dimensions:
Laser Head
48"L x 20"W x 12"H 48"L x 20"W x 12"H 48"L x 20"W x 12"H 48"L x 20"W x 12"H Power Supply
24"L x 23"W x 38"H
24"L x 23"W x 38"H 24"L x 23"W x 38"H 24"L x 23"W x 38"H Utility Requirements:
Electrical 208 VAC, Single Phase, 50 or 60 Hz
208 VAC, Single Phase, 50 or 60 Hz 208 VAC, Single Phase, 50 or 60 Hz 208 VAC, Single Phase, 50 or 60 Hz Water
Tap Water, 4 gpm, <20°C, >30 psi
Tap Water, 4 gpm, <20°C, >30 psi Tap Water, 4 gpm, <20°C, >30 psi Tap Water, 4 gpm, <20°C, >30 psi
